William E Warriner · c57133b0
--- a/data_science_journal_club_checklist.md

+ 68

− 68
+++ b/data_science_journal_club_checklist.md

+ 68

− 68
 @@ -9,80 +9,80 @@ The course runs every session each year: Fall, Spring, Summer. The UAB Academic
 Steps can be performed by any Instructors unless otherwise noted.

 - [ ] Merge GBSC and IDNE sections.
-  - Must be done by IOR.
-  - Please visit [Canvas: Course Cross-Listing SLA page](https://uabprod.service-now.com/service_portal?id=sc_cat_item&sys_id=393e9275377d630024a67c1643990e27).
+    - Must be done by IOR.
+    - Please visit [Canvas: Course Cross-Listing SLA page](https://uabprod.service-now.com/service_portal?id=sc_cat_item&sys_id=393e9275377d630024a67c1643990e27).
 - [ ] Add course Teaching Assistants and Instructors as needed.
-  - Must be done by IOR _after_ merge step is complete! Otherwise, adds may need to be redone.
-  - Please visit [Canvas: Add/Remove User(s) SLA page](https://uabprod.service-now.com/service_portal?id=sc_cat_item&sys_id=76f97b59374a670024a67c1643990ece).
+    - Must be done by IOR _after_ merge step is complete! Otherwise, adds may need to be redone.
+    - Please visit [Canvas: Add/Remove User(s) SLA page](https://uabprod.service-now.com/service_portal?id=sc_cat_item&sys_id=76f97b59374a670024a67c1643990ece).
 - [ ] Upload [Syllabus HTML](data_science_journal_club_syllabus.html)
-  1. Navigate to Syllabus page.
-  2. Switch text entry box to raw HTML mode by clicking `</>` symbol at bottom-right of box.
-  3. Copy-paste [HTML](data_science_journal_club_syllabus.html) into text entry box.
-  4. Switch to WYSIWYG mode: click `</>` symbol again.
-  5. Check "Show Course Summary" checkbox.
-  6. Verify formatting is correct.
-  7. **Manually verify all links by clicking them!**
-  8. Make a note of the Syllabus page URL for use with the Assignments page. _Not_ the Syllabus editing page!
+    1. Navigate to Syllabus page.
+    2. Switch text entry box to raw HTML mode by clicking `</>` symbol at bottom-right of box.
+    3. Copy-paste [HTML](data_science_journal_club_syllabus.html) into text entry box.
+    4. Switch to WYSIWYG mode: click `</>` symbol again.
+    5. Check "Show Course Summary" checkbox.
+    6. Verify formatting is correct.
+    7. **Manually verify all links by clicking them!**
+    8. Make a note of the Syllabus page URL for use with the Assignments page. _Not_ the Syllabus editing page!
 - [ ] Set up the [Assignments HTML](data_science_journal_club_assignment.html)
-  1. Update the Syllabus link in the [Assignment HTML](data_science_journal_club_assignment.html).
-      1. On the first line is an HTML tag that looks like `<a title="Syllabus" href="">`.
-      2. Copy-paste the Syllabus Page URL between the double quotes after `href=`.
-  2. Navigate to Assignments page.
-  3. Click "+ Assignment" button.
-  4. Enter Assignment Name in text entry box: `Demonstration #1`.
-  5. Switch text entry box to raw HTML mode by clicking `</>` symbol at bottom-right of box.
-  6. Copy-paste [HTML](data_science_journal_club_assignment.html) into text entry box.
-  7. Switch to WYSIWYG mode: click `</>` symbol again.
-  8. Set the following field values in the remainder of the form.
-      - Points: `1`
-      - Display Grade as: `Complete/Incomplete`
-      - Submission Type: `No Submission`
-      - Group Assignment: unchecked
-      - Peer Reviews: unchecked
-      - Assign:
-        - Assign to: `Everyone`
-        - Due: last day of final exams according to the current session on the [Academic Calendar](https://www.uab.edu/students/academics/academic-calendar)
-        - Available from/until: blank
-  9. Click save and publish!
-  10. Repeat steps (2) through (9) for `Demonstration #2` and `Demonstration #3`.
-      1. Go to the main Assignments page.
-      2. Click the vertical three dots next to the `Demonstration #1` assignment you created.
-      3. Click "Duplicate" and go from there.
-  11. Verify the assignments are published in the Assignments main page, with a green checkmark icon next to each.
-  12. **Manually verify all links by clicking them!**
+    1. Update the Syllabus link in the [Assignment HTML](data_science_journal_club_assignment.html).
+        1. On the first line is an HTML tag that looks like `<a title="Syllabus" href="">`.
+        2. Copy-paste the Syllabus Page URL between the double quotes after `href=`.
+    2. Navigate to Assignments page.
+    3. Click "+ Assignment" button.
+    4. Enter Assignment Name in text entry box: `Demonstration #1`.
+    5. Switch text entry box to raw HTML mode by clicking `</>` symbol at bottom-right of box.
+    6. Copy-paste [HTML](data_science_journal_club_assignment.html) into text entry box.
+    7. Switch to WYSIWYG mode: click `</>` symbol again.
+    8. Set the following field values in the remainder of the form.
+        - Points: `1`
+        - Display Grade as: `Complete/Incomplete`
+        - Submission Type: `No Submission`
+        - Group Assignment: unchecked
+        - Peer Reviews: unchecked
+        - Assign:
+            - Assign to: `Everyone`
+            - Due: last day of final exams according to the current session on the [Academic Calendar](https://www.uab.edu/students/academics/academic-calendar)
+            - Available from/until: blank
+    9. Click save and publish!
+    10. Repeat steps (2) through (9) for `Demonstration #2` and `Demonstration #3`.
+        1. Go to the main Assignments page.
+        2. Click the vertical three dots next to the `Demonstration #1` assignment you created.
+        3. Click "Duplicate" and go from there.
+    11. Verify the assignments are published in the Assignments main page, with a green checkmark icon next to each.
+    12. **Manually verify all links by clicking them!**
 - [ ] Set up the [settings]
-  - Course Details tab:
-      1. Set appropriate start and end dates according to the [Academic Calendar](https://www.uab.edu/students/academics/academic-calendar).
-      2. End date should be at least one week after the last day of final exams so students may review their grades and course material
-      3. Typically Canvas does a good job of picking these dates
-  - Navigation tab:
-    - Disable all except:
-      - Home
-      - Announcements
-      - Syllabus
-      - Assignments
-      - Grades
-      - People
-      - Chat
-      - UAB Libraries
-      - UAB Cares
-      - UAB Policies
-      - Technology Resources
-      - Student Academic and Support Services
-    - Put them in the above order!
+    - Course Details tab:
+        1. Set appropriate start and end dates according to the [Academic Calendar](https://www.uab.edu/students/academics/academic-calendar).
+        2. End date should be at least one week after the last day of final exams so students may review their grades and course material
+        3. Typically Canvas does a good job of picking these dates
+    - Navigation tab:
+        - Disable all except:
+        - Home
+        - Announcements
+        - Syllabus
+        - Assignments
+        - Grades
+        - People
+        - Chat
+        - UAB Libraries
+        - UAB Cares
+        - UAB Policies
+        - Technology Resources
+        - Student Academic and Support Services
+        - Put them in the above order!
 - [ ] Use Student View to verify the course has appropriate appearance and function.
-  - Make sure syllabus looks correct.
-  - Make sure assignments are visible (they need to be published).
-  - **Manually verify all links by clicking them!**
+    - Make sure syllabus looks correct.
+    - Make sure assignments are visible (they need to be published).
+    - **Manually verify all links by clicking them!**
 - [ ] Publish the course. May need to be done by IOR.
 - [ ] Make an announcement welcoming new students.
-  1. Navigate to Announcements Page.
-  2. Click `+ Announcements` button.
-  3. Enter Topic Title as "Welcome to the Data Science Journal Club course!"
-  4. Switch text entry box to raw HTML mode by clicking `</>` symbol at bottom-right of box.
-  5. Copy-paste [HTML](data_science_journal_welcome_announcement.html) into text entry box.
-  6. Switch to WYSIWYG mode: click `</>` symbol again.
-  7. Modify as necessary to be relevant to the current session.
+    1. Navigate to Announcements Page.
+    2. Click `+ Announcements` button.
+    3. Enter Topic Title as "Welcome to the Data Science Journal Club course!"
+    4. Switch text entry box to raw HTML mode by clicking `</>` symbol at bottom-right of box.
+    5. Copy-paste [HTML](data_science_journal_welcome_announcement.html) into text entry box.
+    6. Switch to WYSIWYG mode: click `</>` symbol again.
+    7. Modify as necessary to be relevant to the current session.

 ## Important Information

 @@ -110,4 +110,4 @@ Steps can be performed by any Instructors unless otherwise noted.

 ## Notes on Using Canvas

-Most Canvas Page text entry boxes, including those of Syllabus and Assignments, have a WYSIWYG HTML editor. The entry mode can be changed to raw HTML mode by clicking the `</>` symbol at the bottom-right of the box. We use raw HTML mode extensively, allowing us to version control invidividual pages for the content of the course.
 \ No newline at end of file
+Most Canvas Page text entry boxes, including those of Syllabus and Assignments, have a WYSIWYG HTML editor. The entry mode can be changed to raw HTML mode by clicking the `</>` symbol at the bottom-right of the box. We use raw HTML mode extensively, allowing us to version control invidividual pages for the content of the course.